Safety Instructions For The Micra-10 Sharpening Machine
Service
Kontakt os
firmanavn: BEIJING DEMINA PRECISION MACHINERY CO., LTD
Tlf 0086-10-62965622 0086-13910819265
E-mail:[email protected]
Adresse: No.1034, Building A, Hongfu Science Park, Beiqijia Town, Changping District, 102209, Beijing, China

Safety Instructions For The Micra-10 Sharpening Machine


2023-05-19


China Micra-10 sharpening machine although the name is a sharpening machine, its use is not only purely sharpening. But also the processing of small hardware, scraper for papermaking machinery, bending machine mold, plastic mechanical cutting edge, mower cutting edge, cutting machine cutting edge, harvester cutting edge, and processing of some small parts plane and so on. Its electromagnetic chuck can design to adjustable in angle or fixed, so its use is very extensive. Some applications are recommended by users. We can make various special specifications according to user requirements. Grinding machines such as grinding machines, grinding machines, etc.

Safety instructions for the sharpening machine

As a high-precision grinding machine, we must pay attention to the standard operation when using the Micra-10 sharpening machine to prevent accidents. Below Demina has sorted out the safe operation of the sharpener and hopes to help you. First, check whether the grinding wheel is tight and eccentric before using the sharpener to sharpen the knife. If cannot meet the user requirements, be sure to adjust and use them. In addition, safety measures such as protective glasses must be worn when sharpening the knife. It is strictly forbidden to adjust the locking tool holder when the grinding wheel is running. If it needs to adjust, it must stop the grinding wheel. Also, in the process of sharpening the knife with a sharpener, it is important to remember that the feed of the tool in the direction of the grinding wheel should not too large. In addition, the Micra-10 small drill grinding machine requires different grinding wheels for the grinding of different tool materials. It is strictly forbidden to grind high-speed steel tools on the alloy grinding wheel. The general-purpose grinding wheel is a resin grinding wheel, and the common grinding machine is used. Accessories must place in a designated position, and tools that cannot be repaired must be disposed of.

The sharp situation of sharpening machine

1. Operate with a small amount of force, but both hands are raised. And the practice of sharpening the point of view also increases, only grinding the edge of the blade, but not the blade. Because the operation of the sharpener is very small, even if it happens by chance, as long as it is a micro-cut. The blade will not form an early roll, but it also constrains the sharp progress. 2. Both hands are reduced, the practice sharpening point of view is reduced. No matter whether the force is applied, the edge and the blade face can not ground, only the inner edge line can ground. In this case, the edge line will be rounded. However, there is no harm to the cutting edge. 3. Adhere to the Micra-10 sharpening machine height of the blade ridge is unchanged. And the hand pressing the blade is unstable due to instability, and the blade is suddenly sinking. Because of the elastic deformation, the sinking of the blade caused the tip to lift 2.620. The practice sharpening point of view dropped to 22.210. The added force is transferred to the inner edge line through the blade, although this will cause the edge line to be rounded and untidy, it is useful to maintain the edge. 4. Adhere to the height of the knife sharpener and the hand of the knife is unstable, causing the blade to tilt. Because of the elastic deformation, the ridge of the blade not only does not increase the point of view of the sharpening but makes the tip of the blade lift up 1.323. The sharpening point of view is reduced to 23.899. The situation is extremely similar to the third condition and can also maintain the cutting edge. 5. Because the oil stone is not smooth, and the particle size is not uniform. The blade will be impacted from time to time, the blade body's elastic deformation will make the blade upturn, and then avoid or reduce the direct impact on the cutting edge, which is conducive to the improvement of sharpness. Beijing Demina Precision Machinery co., ltd Specializing in the production of sharpener equipment. Now Micra-10 sharpening machine for sale, welcome users who need to come to buy.
Få flere oplysninger om vores produkter Læs mere