Maintenance of tool grinding machine
What is a tool grinder? In fact, it is a device dedicated to tool making and sharpening. It is widely used in machinery manufacturers and related tool manufacturers, and is generally purchased in large quantities. For the manufacturer, maintenance and maintenance are very important. The equipment is not cheap, so how do we do the maintenance work? Demina will give you a brief introduction.
First, rust protection.
Mainly for new devices. Sometimes the manufacturer buys more at a time, and the equipment will rust easily after a long time. At this time, it is necessary to pay attention to the regular rust prevention work. And adjust the rust prevention time according to different weather, environment, climate and other factors, so as to avoid affect the later use.
Second, regular inspections.
This is when the device has been used. After all, the device is worn out every time it is used. Especially after long-term use, the surface is easy to accumulate. The ashing time is too long or too thick, which will affect the . Grinder's work efficiency and effect, it is easy to fail, so check the operation regularly and clean up in time.
Third, add lubricants in time.
In particular, the ball screw, whether before or after use, must be guaranteed to have lubricating oil to ensure that the fitting is in a lubricated state. If it is not added in time, it will easily rust and damage, thus affecting the overall use of the device.
Factors to consider when choosing a tool grinder
First, understand the market demand: in addition to the need to consider the situation of the grinding machine, but also pay attention to the market demand. This is very important, because the product is too competitive, there are dozens of hundreds of models for the production of drill bits. So be sure to Pay attention to the commonly used drill bit models, and the selection of equipment must meet these standards. At the very least, the precision of the polished products must meet the corresponding standards.
Second, the structure of the equipment: BT-150HG cutter grinding machine because of the different brands, there are still no small differences in the structure.The quality is also different, the same is the tool grinder, there are great differences in practicality and convenience. So it must be Familiar with the construction of the grinding machine.
1. Grinding wheel: The grinding wheel should consider its speed and stroke progress. The faster the general speed, the more expensive the price, the shorter the stroke interval, the better.
2. Grinding machine spindle: The grinding machine main shaft is the main component of the grinding machine and is washed with water before use.
3. Hydraulic device: The hydraulic device has certain requirements on oil quality and can control the timely supply of oil.
4. Lubrication device: A tank structure for lubricating oil supply, which mainly controls the use of lubricating oil.
5. Flushing and vacuuming devices: These two can be said to the supporting facilities of the grinding machine.
Demina specializes in the production of BT-150HG CBN tool grinder, and welcomes users who need it to consult the price of the equipment.
